Removing the paper roll, Replacing the paper roll – Sharp XE-A303 User Manual

Page 97

Advertising
background image

95

Part

3

FOR THE MANAGER

Part

2

Part

1

Be sure to use paper rolls specified by SHARP.
The use of any other paper rolls other than those specified could cause paper jamming, resulting in register
malfunction.

Paper specification

Paper width: 57.5 ± 0.5 mm
Max. outside diameter: 80 mm
Quality: Thermal paper

• Be sure to set the paper roll prior to using your machine, otherwise it may cause a malfunction.

Install the paper roll in the printer. Be careful to set the roll correctly.

(How to set the paper roll)

Removing the paper roll

When a red dye appears on the paper roll, it is time to replace it. Replace the paper roll with a new one. If you
plan on not using the register for an extended period of time, remove the paper roll, and store it in an appropriate
place.
Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself.

Removing the receipt paper roll:

1.

Remove the printer cover.

2.

Lift up the print roller release lever (indicated as "PULL" on it) of
the receipt side to unlock and open the print roller arm.

3.

Remove the paper roll from the paper roll cradle of the receipt
side.

Do not pull the paper through the printer.

Removing the journal paper roll:

1.

Turn the mode switch to a position other than “

” with the

power cord connected.

2.

Remove the printer cover.

3.

Press the

}

key to advance the journal paper until its printed

part is out of the way.

4.

Cut the paper and remove the take-up spool.

5.

Lift up the print roller release lever (indicated as "PULL" on it) of
the journal side to unlock and open the print roller arm.

6.

Remove the paper roll from the paper roll cradle of the journal side.

Area to cut

Print roller arm
(Receipt side)

To the printer

Incorrect

To the printer

Correct

Replacing the Paper Roll

4

A303_3(En) 06.7.22 4:41 PM Page 95

Advertising