Samsung 172S - Manual (Page 17)

User’s Manual
Setup
Connecting Your Monitor
(SyncMaster 172B/172S)
Setup-General
1. Connect the DC Adapter for your monitor to the power port on the back of the monitor. Plug the
power cord for the monitor into a nearby outlet.
2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
3. Connect the monitor to the Macintosh computer using the D-SUB connection cable.
4. In the case of an old model Macintosh, you need to connect the monitor using a special Mac
adaptor.
5. Turn on your computer and monitor. If your monitor displays an image, installation is complete.