Maintaining your appliance, Self-cleaning, Before a self-cleaning cycle – Samsung FE-R400SB User Manual

Page 32

Advertising
background image

32_ Maintaining your appliance

maintaining your appliance

Self-cleAninG

A self-cleaning oven uses high temperatures (well above cooking temperatures) to burn off leftover
grease and residue completely or reduce them to a finely powdered ash that you can wipe away
with a damp cloth.

CAUTION

During the self-cleaning cycle, the outside of the range can become very hot to touch.

Do not leave small children unattended near the appliance.

The health of some birds is extremely sensitive to the fumes given off during the self-

cleaning cycle of any range. Move birds to another well-ventilated room.

Do not

line the oven walls, racks, bottom or any other part of the range with

aluminum foil. Doing so will result in poor heat distribution, produce poor baking
results and cause permanent damage to the oven interior (aluminum foil will melt to
the interior surface of the oven).

Do not

force the oven door open. This can damage the automatic door locking

system. Use care when opening the oven door after the self-cleaning cycle is
complete. Stand to the side of the oven when opening the door to allow hot air or
steam to escape. The oven may still be

VERy HOT.

Before a self-cleaning cycle

Fig. 1

We recommend venting your kitchen with an open window

or using a ventilation fan or hood during the self-cleaning
cycle.

Remove the wire rack, broil pan, broil pan insert, all

cookware and any aluminum foil from the oven.

Wipe up debris from the oven bottom. (Fig. 1)

The silver-colored oven racks can be self-cleaned, but they

will darken, lose their luster and become hard to slide.

Residue on the front frame of the range and outside the

gasket on the door will need to be cleaned by hand. Clean
these areas with hot water, soap-filled steel-wool pads or
cleansers such as Soft Scrub. Rinse well with clean water
and dry.

Do not clean the gasket. The fiberglass material of the oven

door gasket cannot withstand abrasion. It is essential for
the gasket to remain intact. If you notice it becoming worn
or frayed, replace it. (Fig. 2)

Make sure the oven light bulb cover is in place and the

oven light is off.

Don’t hand
clean the
oven door
gasket.

Fig. 2

You may
hand clean
the door.

FE-R400_XAC_DG68-00297A.indd 32

2010-03-23 5:47:19

Advertising
This manual is related to the following products: