Adjusting the sound characteristics, Changing the bbe mp setting – Sony CDX-F7705X User Manual

Page 21

Advertising
background image

21

When an MP3 file is played, you can select an
album using the rotary commander.

(With this unit)

(With optional unit)

Changing the operative direction

The operative direction of controls is factory-set
as shown below.

If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.

Press

(SOUND)

for 2 seconds while

pushing the VOL control.

Tip
You can also change the operative direction of these
controls with the unit (page 22
).

Adjusting the sound
characteristics

You can adjust the bass, treble, balance, fader,
and subwoofer volume.

1

Press

(SOUND)

repeatedly to select

the desired item.

Each time you press (SOUND), the item
changes as follows:

BASS (bass)

t

TREBLE (treble)

t

BALANCE (left-right)

t

FADER (front-

rear)

t

SUB (subwoofer volume)

2

Adjust the level of a selected item by
pressing

<

or

,

.

After 3 seconds, the display returns to the
normal play mode.

Note
Adjust within 3 seconds after selecting the item.

Tips
When adjusting with the unit, press

(SOUND)

repeatedly and then rotate the volume control dial.

When adjusting with the rotary commander, press

(SOUND)

repeatedly and then rotate the VOL

control.

Changing the BBE MP setting

The BBE MP process effectively adds warmth
and provides clear CD quality sound even from
heavily compressed MP3 material.

During playback on this unit, press

(5)

(BBE MP) to select “BBE MP-on.”

To cancel the BBE MP, select “BBE MP-off.”

Note
The BBE MP function is available only when playing
back on this unit (when playing back on the optional
unit, BBE MP is not available).

Tip
You can change the BBE MP setting only when
playing back on this unit.

To

Do this

Skip albums
– Album selection

Push in and rotate [once for
each album] the control.
To continuously skip
albums, push in and rotate
(and hold) the control.

To

Do this

Skip discs
– Disc selection

Push in and rotate [once for
each disc] the control.
To continuously skip discs,
push in and rotate once and
rotate again within about 1
second (and hold) the
control.

Skip albums
– Album selection

Push in and rotate the
control [hold for a moment]
and release.
To continuously skip
albums, push in and rotate
again (and hold) within
about 1 second of first
releasing the control.

To increase

To decrease

Advertising
This manual is related to the following products: