Sony CPD-G520 - Manual (Page 6)

6
C:\DATAFOLDER\##sagyou##\##01 Jan\407977133CPDG520UC\US\01US04BAS-UC.fm masterpage:Left
CPD-G520
4-079-771-33 (1)
Setup
Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• Video signal cable (1)
• Warranty card (1)
• This instruction manual (1)
Step 1: Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
Notes
• Do not touch the pins of the video signal cable connector as this might
bend the pins.
• When connecting the video signal cable, check the alignment of the
HD15 connector. Do not force the connector in the wrong way or the
pins might bend.
x Connecting to an IBM PC/AT or compatible
computer
x Connecting to a Macintosh or compatible
computer
x Connecting to a second computer
AC IN
2 1
video signal cable
(supplied)
IBM PC/AT or compatible
computer
to HD15
to video output
AC IN
2 1
You will need a Macintosh adapter (not supplied).
to HD15
video signal cable
(supplied)
to video output
Macintosh adapter
(not supplied)
Macintosh or compatible computer
AC IN
2 1
Refer to the preceding
examples to connect your
computer.
video signal cable
(not supplied)
to HD15