Sony HANDYCAM DCR-PC1000 - Manual (Page 15)

15
Getting Started
DCR-PC1000 2-591-678-11(1)
Step 5: Using the touch panel
You can play back recorded pictures (p.
23), or change the settings (p. 36) using the
touch panel.
Place your hand on the rear side of
the LCD panel to support it. Then,
touch the buttons displayed on the
screen.
Touch the button on the LCD screen.
DISPLAY BATT INFO
• Perform the same actions as explained above
when you press the buttons under the LCD
frame.
• Be careful not to press buttons under the LCD
frame accidentally while using the touch panel.
To hide the screen indicators
Press DISPLAY BATT INFO to toggle the
screen indicators (such as time code, etc.)
on or off.
Changing the language setting
You can change the on-screen displays
to show messages in a specified
language. Select the screen language
in [LANGUAGE] on the
(TIME/
LANGU.) menu (p. 36, 58).
Checking the screen indicators
(Display guide)
You can easily check the meaning of each
indicator that appears on the LCD screen.
1
Touch .
Touch [MENU] during Easy Handycam
operation (p. 20).
MENU
EXPO-
SURE
1/3
0:00:00 60min
TELE
MACRO
FADER
DISP
GUIDE
DIAL
SET
2
Touch [DISP GUIDE].
Select area for guide.
DISP GUIDE END
The indicators vary depending on the
settings.
3
Touch the area including the
indicator that you want to check.
The meanings of the indicators in the
area are listed on the screen. If you
cannot find the indicator you want to
check, touch
/ to toggle.
When you touch , the screen returns
to the area selecting display.
DISP GUIDE
END
FOCUS:
MANUAL
PROGRAM AE:
SPOTLIGHT
STEADYSHOT:
OFF
1/2
To finish the operation
Touch [END].