Hookups, Hooking up the player, Step 1: unpacking – Sony DVP-NS585P User Manual

Page 15: Step 2: inserting batteries into the remote, R) (15)

Advertising
background image

C:\Documents and Settings\PC3\Desktop\My
Document\3089857521 DVP-NS355_GB Rev\SOURCE\DVP-
NS355_GB\01GB05GET-CEK.fm

master page=right

DVP-NS730P

3-089-857-52(1)

15

Ho
oku

p

s

Hookups

Hooking Up the Player

Follow steps 1 to 6 to hook up and adjust the settings of the player.

Notes

• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this player to a TV that does not have a SCART (EURO AV) or video input jack.
• Be sure to disconnect the mains lead of each component before connecting.

Step 1: Unpacking

Check that you have the following items:
• Audio/video cord (pinplug

×

3

y pinplug

×

3) (1)

• Remote commander (remote) (1)
• R6 (size AA) batteries (2)

Step 2: Inserting Batteries into the Remote

You can control the player using the supplied remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries to the markings inside the compartment. When
using the remote, point it at the remote sensor

on the player.

Notes

• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a

malfunction.

• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage

from battery leakage and corrosion.

,

continued

Advertising
This manual is related to the following products: