Fm radio – Samsung STREAM 83I User Manual

Page 65

Advertising
background image

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

FM Radio

Operating your sound system in FM mode

1. Carefully extend the telescopic aerial and press the On/Off button to

switch on your sound system.

2. Press the Mode button as needed to select FM radio mode.

3. Rotate the Tuning/Select control in a clockwise direction. The displayed

frequency will increase. Press the Tuning/Select control to carry out

an auto-tune. Your radio will scan up the FM band from the currently

displayed frequency and will stop scanning when it finds a station of

sufficient strength.

4. The display will show the frequency of the signal which has been

found. If RDS information is available, after a few seconds the display

will show the radio station name.

If you only hear hiss or interference, simply press the Tuning/Select

control to scan further. Your sound system may have found a spurious

interference signal.

5. To find more FM stations press the Tuning/Select control to repeat the

scan operation. To scan down in frequency, rotate the Tuning/Select

control in a anti-clockwise direction first and then press the control.

Your radio will scan down the FM band from the currently displayed

frequency and will stop scanning when it finds a signal of sufficient

strength.

6. When the end of the waveband is reached your sound system will

recommence tuning from the opposite end of the waveband.

7. Use the Volume control to adjust the sound level as needed.

64

FM Radio .

3-5

2

1

7

Advertising