Clock and alarms, Setting the alarm clock - cont, When the alarm sounds – Samsung STREAM 83I User Manual

Page 77

Advertising
background image

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

76

Clock and Alarms .

Setting the alarm clock - cont.

10. Rotate the Tuning/Select control until the 'Volume:' option is highlighted on

the display and press the control if you wish to change it. The sound system

uses the saved volume setting for each alarm when it sounds.

Rotate the control to set the required volume and then press the control to

confirm the setting.

11. In order to store the alarm settings rotate the Tuning/Select control until

'Save' is highlighted. Press the control to store the alarm settings. Your radio

will show 'Alarm saved' and will then go back to the list of alarms with the new

alarm setting shown in the display.

If you decide not to save the settings, press the Back button. The display will

show 'Save changes' with a 'YES' or 'NO' option. Rotate the Tuning/Select

control to choose 'NO' and then press the control. 'Alarm not saved' will show

on the display.

Active alarms are shown using small alarm indicators at the bottom of the

playing displays and on the clock display when in stand-by.

Note: If you make a mistake at any point while setting the alarms, use the Back

button to go back to the previous screen.

When the alarm sounds

The buzzer or radio alarm will sound at the selected times for up to 60 minutes

unless cancelled. The volume used for the alarm will be as specified during the

alarm setting procedure. If the radio cannot connect to the specified radio station,

the buzzer alarm will be used instead.
To cancel an alarm, press the On/Off button to return to stand-by mode.
The alarm icon will flash at the bottom of the playing mode displays, and the radio will

automatically switch back to stand-by mode when the 60 minutes have elapsed.
Note

: If the radio is switched on because of an alarm you can control basic functions

such as volume and selecting presets. You cannot perform operations which involve

the Select control since this also acts as the Snooze button (see page 77).

10-11

Advertising