Sony VGP-XL1B - Manual (Page 17)

VGP-XL1B User Guide 11
Step 2: Install the Sony Changer
Software CD
The Sony ® Changer Software CD contains a software program that
when installed, works with Microsoft ® Windows ® Media Center in
Windows Vista™ Home Premium, or Ultimate to control the
Changer/Recorder.
Important Installation Note
Before beginning the software CD installation process, go to
Windows Update and make sure you have installed the latest
critical updates for the host computer. You should also visit your
computer manufacturer's Web site to ensure that your system
supports Microsoft® Windows Vista™ Home Premium, or
Ultimate. We recommend to update any drivers or firmware that
your manufacturer has distributed to ensure compatibility.
The first part of the installation process is a series of checks to see
if the host computer contains the operating system software
required to properly run the VGP-XL1B Changer/Recorder. During
this process, if a required system software component is outdated
or not found, you will be directed to install the missing operating
system software before continuing.
After all required programs are verified or installed, you will be
presented with a series of basic installations screens. Please read
each screen carefully, then take the appropriate action.
To install the Sony Changer/Recorder Software CD
1 From the host computer, insert the software CD into the optical
drive.
2 Normally, the installation starts automatically. If it does not, from
the Windows taskbar, click the Start button, and then click Run . In
the text box, type: x:\setup.exe (where x is the drive letter of your
optical drive) and click OK .
Note : The following installation procedure must be initiated from
the host computer.