Samsung HT-TZ525 - Manual (Page 37)

37
E
N
G
●
PLA
YBACK
DISC PLAYBACK
dB
Press the 1. OPEN/CLOSE ( ) button to open the disc tray.
Load a disc. 2.
Place a disc gently into the tray with the disc’s label •
facing up.
Press the 3. DISC SKIP button.
Rotate the carousel tray so you can load the third, •
fourth, and fifth discs.
Close the compartment by pressing the 4. OPEN/CLOSE ( )
button again.
Playback starts automatically. •
To stop playback, press the STOP ( ) button during playback.
If pressed once, • PrESS PLAY is displayed and the stop position will be stored in memory.
If the PLAY ( ) button or ENTEr button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice,
• STOP is displayed, and if the PLAY ( ) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press the
PAUSE ( ) button during playback.
To resume playback, press the • PLAY ( ) or ENTEr button.
M
Depending on the content of the disc, the initial screen may appear different. `
Pirated discs will not run in this player because they violate the CSS (Content Scrambling System : `
a copy protection system) recommendations.
Selecting a Disc in the Disc changer
To select a specific disc, press the corresponding the DISC SKIP
button on the remote control, until the required disc indicator
flashes.
If the disc selected is not loaded, the next disc is played •
automatically.