Sony 4-130-181-52(1) - Manual (Page 20)

DR-BT101_4-130-181-52(1)
20
US
Calling while playing back music
The Bluetooth connection using HFP or HSP as well as A2DP is necessary to make
a call while playing back music.
For example, to make a call using a Bluetooth mobile phone while listening to
music on a Bluetooth compatible music player, this unit needs to be connected to
the mobile phone using HFP or HSP.
Make a Bluetooth connection between this unit and the device in
use following the procedures outlined below.
1
Make a Bluetooth connection between this unit and the mobile phone
in use with HFP or HSP following the procedures outlined in “Calling”
(page 17).
2
Operate the Bluetooth device (music player or mobile phone) used for
playing the music to make a Bluetooth connection to this unit using
A2DP.
To make a call while playing
back music
1
Press the multi function button
while playing back music (page
1), or operate your Bluetooth
mobile phone to make a
telephone call.
If no dial tone is heard on this unit,
press and hold the multi function
button for about 2 seconds.
To receive a call while playing
back music
When an incoming call arrives, the
music pauses and the ring tone is
heard from this unit.
1
Press the multi function button
and talk.
After finishing the call, press the
multi function button. This unit is
switched back to music playback.
When no ring tone is heard
even if an incoming call arrives
1
Stop music playback.
2
When ringing, press the multi
function button and talk.