Sharp CD-SW200 User Manual

Page 32

Advertising
background image

03/12/19

CD-SW200 26- 33.fm

32

CD-SW200

Tape Recording

Recording on a cassette tape (continued)

Recording from a CD or MP3/WMA disc

You can record the desired disc using the DIRECT PLAY button.

To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.

1

Press the ON/STAND-BY button to turn the power on.

2

Press the CD button.

3

Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be
performed.

4

Press the

button.

Recording will be paused.

5

Press one of the 1 - 5 buttons to select the desired disc.

6

Within 5 seconds, press the DIRECT PLAY button to start
recording.

Recording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.

Playback of the disc will start approximately 7 seconds after
the tape starts.

Advertising