Sony SLV-EZ727AZ - Manual (Page 16)

16 Getting Started
OK
PLAY
M E N U :
P L E A S E W A I T
A U T O S E T U P
4 0 %
E X I T
Step 4 : Setting up the VCR with
the Auto Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set Up
function. With this function, you can set the TV channels automatically.
1
Turn on your TV and set it to the video channel.
Tune the TV to channel 68 (in Australia) or 63 (in New Zealand)
(the initial RF channel for this VCR). Refer to your TV manual for
TV tuning instructions. If the picture does not appear clearly, see
“To change the RF channel” on page 17.
2
Connect the mains lead to the mains.
The VCR automatically turns on.
The message for the Auto Set Up function appears on the TV
screen.
3
Press OK.
The SYSTEM SELECT menu
appears.
4
Press M/m/</, to select the
appropriate TV system, then press
OK.
The VCR starts searching for all of
the receivable channels and presets
them (in the appropriate order for
your local area).
If you want to change the order of
the channels or disable unwanted
programme positions, see
“Changing/disabling programme
positions” on page 25.
After the search is complete, the clock setting menu appears. See
“Setting the clock” on page 18.
OK
PLAY
E X I T M E N U : O K : S E T
S E L E C T
S Y S T E M
S Y S T E M
S Y S T E M
:
S Y S T E M S E L E C T
– B / G
D / K –
I –
S Y S T E M B / B – ( A U S T R A L I A )
( N E W Z E A L A N D )