Washing a load of laundry – Samsung SilverCare Washer User Manual

Page 14

Advertising
background image

C-3 SAMSUNG Clothes Washer Owner’s Instructions

7.

Select Cycle Option

Delay Start - Any cycle can be delayed for up to 12, 19 or 24hours (select models) in one-hour

increments. Displayed hour indicates the time at which the wash will be finished.

Extra Wash - Add additional time to the wash for better stain removal.

Extra Rinse - Add an additional rinse at the end of the cycle to more thoroughly remove laundry

additives and perfumes.

Extra Spin - Add additional time to remove more water from loads

My Cycle - Choose your favorite cycle including temperature, spin, soil level, option, etc.

Pre Wash - Add detergent to the Pre Wash selection of the detergent compartment. Washer fills

with cold water and detergent, tumbles, then drains and advances to the selected wash cycle.
Some cycles cannot be selected with this option.*

* You can`t select PreWash option in Delicate/Hand Wash, Wool, Quick Wash and Active Wear

cycles.

8.

Cycle Selector

Select the appropriate cycle for the type of load.
This will determine the tumble pattern and spin speed for the cycle.

NOTE:

To minimize wrinkling of loads, select the Perm Press cycle.

Heavy Duty - For sturdy, colorfast fabrics and heavily soiled garments.

Normal - For most fabrics including cottons, linens, and normally soiled garments.

Whites - For white fabrics with or without bleach.

Perm Press - For wash-and-wear, synthetic fabrics, and lightly to normally soiled garments.

Delicates/Hand Wash - For sheer fabrics, bras, lingerie silk, and other handwash-only fabrics. For

best results, use liquid detergent.

Wool - For machine-washable wool. Loads should be under 8 pounds.

The wool wash cycle of this machine has been approved by Woolmark for the

washing of machine washable Woolmark products provided that the products are

washed according to the instructions on the garment label and those issued by

the manufacturer of this washing machine, M0509.

Quick Wash - For lightly soiled or wrinkled garments needed quickly.

Towels - For bath towels and washcloths. Do not load too many towels because they absorb lots

of water.

Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to 150°F to eliminate

bacteria.

NOTE:

If Pause is selected during the heating portion of the Sanitize Cycle, your Washer door will

remain locked for your safety.

Bedding - For bulky items such as blankets and sheets.

Active Wear - For washable sportswear.

Eco Wash - For geographic areas where energy and water conservation is needed. It saves 5% of

Energy and 5% of water consumption.

Rinse + Spin - Use for loads that need rinsing only or to add rinse-added fabric softener to a load.

Spin Only - Provides a spin to remove more water from the load.

9.

Start/Pause selection button

Press to pause and restart programs.

10.

Power button

Press once to turn your Washer on, press again to turn your Washer off. If your Washer is left on for

more than 10 minutes without any buttons being touched, the power automatically turns off.

NOTE :

Cycles and options vary by model. Refer to cycle chart in Appendix.

Washing a Load of Laundry

Advertising
This manual is related to the following products: