Samsung LCD12B - Manual (Page 21)

14
• Dial the extension number or group number.
• Wait for the party to answer. If you hear a brief tone burst instead of
ringback tone, the station you called is set for Voice announce or
Auto answer. Begin speaking immediately after the tone.
• Finish the call by replacing handset or press A N S / R L S k e y.
N O T E S : 1. If you have a DSS key assigned to an extension or station
g roup, you may press this key instead of dialing the
n u m b e r.
2. If the Hot Keypad feature has been turned off, you must
first lift the handset or press SPK b e f o re you begin dialing.
ANSWERING INTERCOM CALLS
• When your keyset rings, simply lift the handset - OR- press the
A N S / R L S key to be connected to the calling station.
• Finish call by replacing handset or pressing A N S / R L S b u t t o n .
See Ring Pre f e rence under Customizing Your Keyset.
VOICE ANNOUNCE MODE
(INTERCOM CALLS ONLY)
When another station calls you, your keyset will sound a brief
attention tone and you will hear the caller's announcement.
• P ress A N S / R L S to turn on microphone and speak handsfree - OR -
lift the handset to re p l y.
• To finish the call, replace the handset or press the A N S / R L S k e y.
IN TERCOM CALLS
CALLING OTHER STATIONS
≈∞∆ ˘ 99.1.20 2:58 PM ∆ ‰¿Ã¡ˆ14