Samsung LCD12B - Manual (Page 26)

19
N O T E : If the Hot Keypad feature has been turned off, you must first
lift the handset or press the SPK key before you begin dialing.
TRANSFERRING CALLS
Transfer is used to send any call to another extension in one of two
ways. You can do a screened transfer by informing the other extension
who is calling or you can do a blind transfer without notification.
• While on a call, press the TRSF key and dial an extension number or
g roup number. You call is automatically put on transfer hold.
O R
P ress a DSS key or station group key. Your call is automatically put
on transfer hold.
• Hang up when you hear ringing (this is an unscreened or blind
t r a n s f e r ) .
O R
• Wait for the called party to answer and advise him/her of the call
and hang up. If the transfer is refused, you will be reconnected to the
outside line when the called station hangs up or you can press TRSF
to return to the outside party. If you wish to send the call to another
extension without waiting for the fitst station to hang up, simply
p ress another DSS button.
O R
P ress the CALL button or C.O. line key to return to the outside
party and begin the transfer press again.
When you are the transferring a call to a keyset set for Voice Announce
or Auto Answer, the transferred call will always ring.
N O T E S : 1. After the inside party answer, you may alternate back and
forth between the parties by pressing the TRSF k e y.
2. If you receive No More Calls tone, that station has no key
available to receive another call. Press TRSF to return to
the other party.
≈∞∆ ˘ 99.1.20 2:58 PM ∆ ‰¿Ã¡ˆ19