Setting the speaker mode, Remote control – Samsung 20060510083254531 User Manual
Page 21
20
Setting the Speaker Mode
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Frequency response from the speaker will be adjusted according to your speaker configuration and whether certain
speakers are used or not.
Press SPK SELECT button to select the speaker you want.
•
Each time you press this button, F.SPK
➝
C.SPK
➝
S.SPK
➝
SW SPK
➝
CROVR
➝
SPK MODE OFF will be selected in turn.
Press …† button to set the speaker mode.
To Exit Setup Mode
•
Wait for about 5 seconds or press the SPK SELECT button of the remote control to
select SPK MODE OFF.
To turn the SUBWOOFER On or Off.
Press SUBWOOFER button.
•
Each time you press this button, SW SPK : YES, SW SPK : NO will be selected in turn.
•
If you play in 2 Channel Stereo, select 'YES' to use Subwoofer and 'NO' not to use.
√
•
If F.SPK is set to ‘SMALL’, SW SPK is automatically set to ‘YES’.
1
2
REMOTE CONTROL
AV-R610 XAC ENG-1 5/5/06 14:4212:0 Page 20