Samsung 20060510083254531 - Manual (Page 48)

47
Symptom Check Remedy
Can't select Dolby Pro
Logic ll Mode.
• Is the input signal selected properly? • Select 2 channel Dolby Digital, PCM, and
Analog input signal.
There is no sound when
playing DTS encoded DVD
and CD.
• Is analog input selected? • Check whether digital external component
is properly connected and refer to page 22
to select the digital input.
• If PROTECTION appears on the display,
check whether speaker terminal is shorted
and then turn on the device.
MISCELLANENOUS
Product Protection Function
Heat Protection
• Protection function works if the main unit is overheated or power
transformer is overheated.
"
" appears in the display when this function
works.
- If speaker terminal is shorted
- If speaker cord is shorted
If there is no problem when you turn it on again after turning it
off, PROTECTION mark will disappear on the display and the
unit will work properly.
AV-R610 XAC ENG-1 5/5/06 14:4212:0 Page 47