Samsung BN68-01736C-00 - Manual (Page 65)

English - 
Auto Wall-Mount (Sold separately)
Once the auto wall mount is installed, your tV’s position can be easily adjusted.
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
The Auto Wall-Mount screen is displayed.
If the Auto Wall-Mount screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENtER button.
• Press the ▲ or ▼ button to select “Auto Wall-Mount”, then
press the ENtER button.
Remembering the Position
2. Adjust to the desired position using the ▲,▼,◄,► buttons.
If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
Press the INFO button to reset. Press the ◄ or ► button to
select “Yes”, then press the ENtER button.
The position is initialized to the default setting.
. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
To not save the current position, press the REtURN button.
When selecting a save mode, you cannot use the Colour
buttons.
. Press the ENtER button to save.
When Position1 is selected, the message "Current position
saved as Position1" is displayed.
. Press the ENtER button.
The saved Position appears on the left side of the OSD.
➣
➣
➣
➣
➣
➣
➣
➣
tV Setup
Plug & Play 
Language : English 
time 
Auto Wall-Mount 
Melody : Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
Move Enter Return
Save
Select a mode to save
Position1
Position2
Position
Move Enter Return
Auto Wall-Mount
Adjust save Centre
Position 1 2 
INFO
tV Rear Panel
Auto Wall-Mount
SERVICE Cable (Not supplied)
BN68-01736A-X1Eng-0623.indd 63 2008-07-14 �� 10:58:32