Sony LocationFree Player for PSP - Manual (Page 6)

Gettin
g
Star
ted
6
Getting Started
This section describes the setup for connecting the PSP ® system to the Base Station inside the home.
For details about preparing the Base Station, refer to the Quick Start Guide or Operating Instructions
supplied with the Base Station.
Press the POWER button on the front
panel of the Base Station to turn it on.
The POWER LED on the front panel of the Base
Station will light up green.
• Check that the video devices are connected
properly to the audio/video input plugs of the
Base Station.
• Check that the IR Blaster is connected properly
to the IR BLASTER port on the Base Station,
and make sure the IR Blaster is positioned so
that it faces the IR Receiver of the video device
correctly.
Setting Up to Connect to the Base Station
Preparing the Base Station
WIRELESS
SETUP MODE
RESET
NETWORK
SETUP MODE/ NET AV
WIRELESS
SETUP MODE
RESET
NETWORK
SETUP MODE/ NET AV
POWER
LED
LF-B20/LF-B10
WIRELESS
NETWORK
SETUP
MODE
NET AV
RESET
WIRELESS
NETWORK
SETUP
MODE
NET AV
RESET
POWER
LED
LF-V30