Sony XR-1800R - Manual (Page 8)

EN
8
Tuning in by adjusting the
frequency
— Manual tuning
1
Select the desired band.
2
Press and hold either side of
(SEEK/MANU).
Release the button when the desired station
is received.
PREVENT ACCIDENTS!
When tuning in during driving, use the
automatic tuning and the memory preset
tuning instead of the manual tuning.
Memorizing stations
automatically
— Best Tuning Memory (BTM)
This function selects from the currently
received band the stations with the strongest
signals and memorizes them in order of their
frequency.
PREVENTING ACCIDENTS!
When tuning in while driving, use the
automatic tuning or memory preset search
function instead of manual tuning.
1
Select the desired band.
2
Press (TUNER/BTM) for two seconds.
Notes
• The unit will not store stations with weak signals
on the preset number buttons. If there are only a
few stations received, some preset number
buttons will remain empty.
• When a preset number indicated on the display,
the unit starts storing station from the one
currently display.
Memorizing only the
desired stations
1
Select the desired band.
2
Tune in the station which you wish to
store on the preset number button.
3
Press and hold the desired preset
number button ( (1) to (6) ) for two
seconds until you hear a beep tone.
The number of the pressed preset number
button appears in the display window.
Up to 6 stations on each band (FM1, FM2, FM3,
MW, and LW) can be stored on the preset number
buttons in the order of your choice. Therefore, 18
stations can be memorized on FM.
If you try to store another station on the same
preset number button, the previously stored
station will be erased.
FM1 n FM2 n FM3 nMW
n LW n FM1 FM1 n FM2 nFM3 n MW n
LW n FM1
FM1 n FM2 n FM3 n MWn
LW n FM1
For higher
frequencies
TUNER
BTM
SEEK
MANU
SEEK
MANU
TUNER
BTM
TUNER
BTM
TUNER
BTM
For lower
frequencies