First time installation, 1 general information, 2 first time installation – Sagem ITD 60 User Manual
Page 11: 3 language
- 5 -
4-1 GENERAL INFORMATION
Once you have correctly connected the Set Top Box, you also have to perform a “First time installation”.
During this procedure, helpful information is displayed at the bottom of the menus.
Please note!
The
button always confirms a selection within these menus, and pressing it will take you to the next
step in the installation process. However, and this is important, often more than one value has to be entered
in a menu. First, perform all necessary settings on the different lines. Then, confirm them all simultaneously
by pressing
.
• Use cursors
and
to move upwards and downwards from one line to another.
• Use cursors
and
to change settings.
You can also use the numerical keys on the remote control to enter numeric values.
4-2 FIRST TIME INSTALLATION
• Plug in your Set Top Box.
• The “First time installation” menu is shown.
• Press
to continue.
4-3 LANGUAGE
• Select the desired language with cursors
and .
• Press
to continue.
4. FIRST TIME INSTALLATION