Normal recording – Sharp SRT-8040 User Manual

Page 20

Advertising
background image

NORMAL RECORDING

Normal Recording

Before starting

œ

Turn the power on to all devices used.

œ

Load a cassette tape with its erasure-prevention tab
intact.

NOTES:

œ

If “TAPE IN MODE” is set to “REC” in the
(GENERAL SET) menu, recording will start.

œ

Press the ON SCREEN button to display the
superimpose display.

œ

Set the “TAPE” item in the (GENERAL SET)
menu according to the duration of the tape used.

1

Press the REC/PLAY SPEED

l

(or

j

) button to set

the recording speed mode.

ø

The recording speed mode appears on-screen
and on the digital display.

2

Press the REC button.

ø

The record indicator

m

lights.

ø

Recording starts.

ø

If the tape end is reached while recording,
“OFF” is displayed on the digital display and the
unit goes into the mode set at the “TAPE END
MODE” setting in the (GENERAL SET) menu.
To cancel the “OFF” display, press the
STOP,
EJECT or PLAY button or turn the SHUTTLE
ring.

ø

When the end of the tape is reached, the TAPE
END OUT
terminal output will be 0V. To cancel
the output, press the
STOP button.

3

To stop recording, press the STOP button.

NOTES:

œ

A tape recording made on this VCR may not play
back with the same degree of clarity on a real time
video cassette recorder from another manufacturer.

œ

If you press the REC button and the loaded cassette
has no erasure-prevention tab, the VCR will eject the
cassette.

[Recording Speed Mode]

œ

The available recording speed modes vary depending
on the VCR model. Refer to the “FEATURES” on
page 3 for the available recording speed modes for
your model of VCR.

(When the “TAPE” is set to “T-160” in the (GENERAL
SET) menu)

Recording

speed mode
(hour mode)

Maximum

recording

duration

(hours)

Recording

interval

(second)

Audio

recording

Tape motion

8

8

1/60

Possible

Continuous

24

24

3/60

40

40

5/60

64

72

9/60

Not possible

Intermittent

96

104

13/60

128

136

17/60

160

168

21/60

224

232

29/60

320

328

41/60

480

488

61/60

640

648

81/60

720

968

121/60

960

1288

161/60

000

Single image recording

(When the “TAPE” is set to “T-120” in the (GENERAL
SET) menu)

Recording

speed mode
(hour mode)

Maximum

recording

duration

(hours)

Recording

interval

(second)

Audio

recording

Tape motion

6

6

1/60

Possible

Continuous

18

18

3/60

30

30

5/60

48

54

9/60

Not possible

Intermittent

72

78

13/60

96

102

17/60

120

126

21/60

168

174

29/60

240

246

41/60

360

366

61/60

480

486

81/60

720

726

121/60

960

966

161/60

000

Single image recording

NOTE:

œ

The tape speed display will vary according to the
“TAPE” item in the (GENERAL SET) menu setting. In
this manual, all the examples and displays used are
for when the “TAPE” item is set to “T-160”. If set to
“T-120”, please refer to the table above for the
corresponding durations and displays.

For example, if the recording speed mode is “8”, then
the corresponding recording speed when set to
“T-120” will be “6”, and, the counter reading of
8H 00M 00S will be 6H 00M 00S when set to “T-120”.

RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002

English

19

Advertising
This manual is related to the following products: