Step 2 : setting up the remote commander, Inserting the batteries, Using the remote commander – Sony SLV-ED949SG User Manual
Page 11
11
Getting Started
Getting Started
1
2
3
4
5
6
7
8
9
0
Step 2 :
Setting up the remote
commander
Inserting the batteries
Insert two R6 (size AA) batteries
by matching the + and – on the
batteries to the diagram inside the
battery compartment.
Insert the negative (–) end first,
then push in and down until the
positive (+) end clicks into
position.
Using the
remote commander
You can use this remote
commander to operate this VCR
and a Sony TV. Buttons on the
remote commander marked with
a dot (•) can be used to operate
your Sony TV. If the TV does
not have the
symbol near the
remote sensor, this remote
commander will not operate the
TV.
Remote sensor
To operate
Set •TV/VIDEO to
the VCR
VIDEO and point at the remote sensor at the VCR
a Sony TV
•TV and point at the remote sensor at the TV
continued
•TV/VIDEO