Antennas with 75-ohm round leads, Separate vhf and uhf antennas, Connecting cable tv – Samsung CL17M2MQ User Manual

Page 10: Cable without a cable box

Advertising
background image

10

I

N S TA L L AT I O N

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

ANT IN

1

Plug the incoming cable
into the VHF/UHF antenna
terminal on back of the TV.

Because this TV is cable-ready,

you do not need a cable box to view
unscrambled cable channels.

ANT IN

2

Plug the combiner into the
VHF/UHF terminal on the
bottom of the rear panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics shops).

1

Connect both antenna
leads to the combiner.

Antennas with 75-ohm Round Leads

1

Plug the antenna lead into
the VHF/UHF
terminal on the bottom of
the back panel.

ANT IN

Advertising
This manual is related to the following products: