Samsung CL17M2MQ User Manual

Page 11

Advertising
background image

11

I

N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is con-
nected to the ANTENNA
OUT terminal on your
cable box.

This terminal might be labeled

“ANT OUT”, “VHF OUT” or simply,
“OUT”.

ANT IN

2

Connect the other end of
this cable to the VHF/UHF
antenna terminal on the
back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the
cable that is connected to
the ANTENNA IN
terminal on your cable
box.

This terminal might be labeled

“ANT IN”, “VHF IN” or simply,
“IN”.

2

Connect this cable to a
two-way splitter.

3

Connect a coaxial cable
between an OUTPUT ter-
minal on the splitter and
the IN terminal on the
cable box.

Incoming Cable

Splitter

Incoming Cable

Cable Box

Splitter

Continued...

4

Connect a coaxial cable
between the ANTENNA
OUT terminal on the cable
box and the B–IN terminal
on the RF(A/B) switch.

Incoming

Cable

Cable Box

RF (A/B)

Switch

Splitter

Advertising
This manual is related to the following products: