Step 4: connecting the audio cords, Select a connection – Sony DVP-NC625 User Manual
Page 17
17
H
ook
up
s
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected
Connection
Your setup
TV
• Surround effects: TVS DYNAMIC (page 45),
TVS WIDE (page 45)
(page 18) Example
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 45)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 45)
(page 19) Example
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 60)
(page 20) Example
AV amplifier (receiver) with a digital input jack
having a Dolby Digital or DTS** decoder and 6
speakers
• Surround effects: Dolby Digital (5.1ch) (page 60),
DTS (5.1ch) (page 60)
(page 21) Example
A
D
A
B
C
D
,
continued