Controlling your tv with the supplied remote, Controlling other tvs with the remote – Sony DVP-NC625 User Manual

Page 54

Advertising
background image

54

Controlling Your TV with
the Supplied Remote

You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.

You can control your TV using the buttons
below.

Note

Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.

Controlling other TVs with the
remote

You can control the sound level, input source,
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.

1

While holding down TV [/1, press the
number buttons to select your TV’s
manufacturer’s code (see the table
below).

2

Release TV [/1.

Code numbers of controllable TVs

Notes

• If you enter a new code number, the code number

previously entered will be erased.

• When you replace the batteries of the remote, the

code number you have set may be reset to the
default setting. Set the appropriate code number
again.

By pressing

You can

TV [

/

1

Turn the TV on or off

VOL +/–

Adjust the volume of the TV

TV/VIDEO

Switch the TV’s input source
between the TV and other
input sources

Number
buttons

Manufacturer

Code number

Sony (default)

01

Aiwa (default)

01

JVC

09

Panasonic

19

Philips

21

RCA

10

Samsung

20

Sanyo

11

Sharp

18

Toshiba

07

Zenith

15

Advertising