Siemens Hicom 150 E - Manual (Page 15)

7
Environmental conditions
For safety information, see page I. Permitted temperature range, see
page 52.
Radio range
Displaying the radio range
Connection
quality
The strength of the incoming signal is displayed by the "receive field
strength" icon in on or message status:
Range problems The radio range is different indoors and outdoors, see page 52.
Leaving the radio network
After leaving the
radio network
The base name flashes on the display. The mobile telephone attempts
repeatedly to synchronise with a base. The intervals between syn-
chronisation attempts increase on account of the integrated power
saving function.
Re-registering Switch off the mobile telephone and switch it back on again.
Note:
Do not install the mobile telephone in the vicinity of electronic
equipment to avoid mutual interference.
1
no receive field strength
S
low receive field strength
R
50% receive field strength
Q
100% receive field strength
Note:
Please consult your system administrator in the event of range
problems.
Note:
If you do not require the date and the time to be displayed (see
page 41), you can switch your mobile telephone off to save the
batteries.