Samsung HMX-R10SN - Manual (Page 128)

1
1. Turn on your camcorder, and touch the play( ) tab.
• Set “TV Type” according to the display device  page 104
• Touch the Menu( )  Setting ( )tab  “Analog TV Out”  “Composite.”  page 105
2. Insert the recording media in the recording device.
• If your recording device has an input selector, set it to the input mode.
3. Connect your camcorder to the recording device (VCR or DVD/HDD recorder) with the supplied
component/AV cable (composite connection).
• Connect your camcorder to the input jacks of the recording device.
4. Start the playback on your camcorder, and record it on the recording device.
• Refer to the instruction manuals supplied with your recording device for details.
5. When dubbing is finished, stop the recording device, and then your camcorder.
• Refer to the instruction manuals supplied with your recording device for details.
• Videos recorded on this camcorder can be dubbed by connecting with the supplied
component/AV cable. All the recorded videos will be dubbed with SD (standard
definition) image quality, regardless of the recording resolution (HD/SD).
• You cannot dub to a recorder with an HDMI cable.
• To copy a video recorded with HD (high definition) image quality, use the built-in software
of your camcorder, and copy the images to your computer.
• Since dubbing is performed via analog data transfer, the image quality may deteriorate.
• To hide the screen indicators (such as a counter, etc.) on the screen of the monitor device
connected, set “TV Display: Off.”  page 104
• To record the date/time, display it on the screen.  page 92
• When you are connecting your camcorder to a monaural device, connect the green plug
of the component/AV cable to the video input jack, and the red (right channel) or the white
(left channel) plug to the audio input jack on the device.
dubbing videos
DUBBING TO A VCR OR DVD/HDD RECORDER
You can dub images played back on you camcorder to other recording devices, such as VCRs or DVD/
HDD recorders. Be sure to connect your camcorder to the wall outlet using the supplied AC power adaptor
for this function.
PRECHECK!
Since dubbing is performed via analog data transfer (composite connection), use the supplied
component/AV cable.
DC IN
S-VIDEO IN
L R
AUDIO IN VIDEO IN
Camcorder
Signal flow
Component/AV cable
VCR or DVD/HDD recorder