Using the touch panel, Basic operation of the camcorder – Samsung HMX-R10SN User Manual

Page 38

Advertising
background image



Remaining battery (approx.)

Available recording

time (approx.)

• When the power is off, press and hold the Display (

/iCHECK) button.

• When the power is on, press and hold the Display (

/iCHECK) button for about 3 second.

• The remaining battery time and the available recording

time appear for about 10 seconds according to the

storage and quality setting values.

• Battery information is available only when the battery pack is inserted in your camcorder.

• If the camcorder is connected by using the AC Power adaptor, and the battery is not

inserted, the “No Battery” message appears.

The touch panel allows you to enjoy playback and recording with a simple touch of your

finger. Place your hand on the rear side of the LCD screen to support it.

Then, touch the items displayed on the screen.

USING THE TOUCH PANEL

• Be careful not to accidentally press the buttons near the LCD panel while using the touch

panel.

• The tabs and indicators that appear on the LCD screen depend on the current recording/

playback status of your camcorder.

• Do not place a protective film on the LCD screen.

• If a film is applied for a long while, strong cohesion on the surface of the screen may

cause a malfunction of the touch panel.

DC IN

Touch panel

STBY

00:00:00 [55Min]

90

MIN

basic operation of the camcorder

Checking the remaining battery and recording capacity

Remaining battery (approx.)

90Mn

90 Mn

Battery

Card

([HD] 1080/60i SF)

100%

0%

Advertising
This manual is related to the following products: