Voice recording – Samsung YP-NDU64B User Manual

Page 5

Advertising
background image

6

Voice Recording

Recording the voice messages

1

Press the MODE button on the main unit to switch
into the voice mode.
- Voice mode can only be activated in the stop mode.

2

Press the REC button and the voice messages will be
recorded through the microphone.
- Press the Stop button ( ) to stop recording. If you

repeat this operation over and over, the voice
messages will be recorded in the sequence of
V001, V002....V00N.

N

No

ottee

- This feature allows you to easily record lectures at school or

institute, interview and conference messages, etc. It therefore
enhances study effectiveness and lets you keep important
things for a long time.

- The player will automatically stop recording when the memory

becomes full.

- The voice messages are recorded on the built-in memory. If the

memory is short in capacity, however, they will be recorded on
the smart media card (in the sequence of V001, V002... V00N).

- Be careful not to press the Erase button long because the

erasing function may run.

- Voice recording is made only on the main system.

Playing the recorded voice messages

1

Use the FF (

) and REW (

) buttons to select the

track (V001, V002...) you prefer.

2

Press the

button to playback the selected track.

You can pause the track by pressing the

button

once again.
- Press the

button again to resume playback.

N

No

ottee

- When you press the

button without selecting V001,

V002... V00n, you can listen to the recorded track that applies
to the number currently shown on the LCD panel.

- Press the FF or REW button during playback to move forward

or in reverse at a faster speed.

Playing the recorded voice messages

1

Use the FF and REW buttons to select the track (V001,
V002...) you want to erase.

2

Press the ERASE button for at least 1 second and the
message "Erase?" will appear on the LCD panel. Then
press the

button to erase the selected track.

N

No

ottee

- To cancel the erasing function press the

button.

- After the selected track is erased, the player will show the next

track number.

1_eng_nd 00/12/5 1:47 PM Page 6

Advertising
This manual is related to the following products: