Sony SPP-SS966 - Manual (Page 30)

30 US Telephone Features
You can transfer a call between the handset and base phone without
disconnecting the call.
To transfer from the base phone to the handset
1
Press (INTERCOM) to page the
handset.
The call is put on hold on the
base phone and the handset
rings. “** PAGING **”
appears on the display of both
the base phone and handset.
2
Press
(TALK/ CALL WAITING/ FLASH) or
(INTERCOM) on the handset.
“INTERCOM” appears on the
display of both the handset and
base phone.
You can talk between the base
phone and the handset.
3
To talk to the caller with the
handset:
• Press (INTERCOM) on the
handset.
or
• Press (SPEAKERPHONE) on
the base phone.
“TALK” appears on the display
of the handset.
If no one answers the phone
Press (INTERCOM) again.
Note
You cannot receive an intercom call on the handset when its RING switch is set
to OFF.
Tips
• If you have accidentally pressed (HOLD) in step 1, just press (INTERCOM)
and you will get the same result as by pressing (INTERCOM) only.
• The LINE lamp on the base phone flashes during intercom.
Transferring a call
(TALK/ CALL WAITING/ FLASH)
(SPEAKERPHONE)