Sony SPP-SS966 - Manual (Page 37)

Caller ID Features
37 US Caller ID Features
Storing a number of the Caller ID list into
the Phone Directory
1
Display the name and phone number you want
to store from the Caller ID list (see page 33).
2
Confirm the number and press Jog Dial.
3
Turn Jog Dial up to make “PGM” flash and
press Jog Dial.
The cursor flashes at the end of the name.
Enter or change the name, if necessary (see
page 24).
4
Press Jog Dial.
The cursor flashes at the end of the phone
number.
Enter or change the phone number, if necessary
(see page 24).
5
Press Jog Dial again.
You’ll hear a long confirmation beep and the
name and number are stored.
Notes
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• If the number displayed in step 1 is not the one you should call back, you can
change the number of digits of the phone number as described on page 38.
• If the phone is connected to a Private Branch Exchange (PBX), you may need
to add an outside line access digit.
SMITH JOH
12011234567
N
SMITH JOHN
1201123456 7
DIAL PGM ERASE
1-201-123-4567
1-201-123-4567
SMITH JOHN
continued