Sharp UX-D50 - Manual (Page 12)

10
UP and DOWN arrow keys
Enlarge/reduce setting: When making a copy of a document, press these
keys to select an enlarge/reduce setting (page 106).
Volume setting: When a document is not in the feeder, press these keys to
change the speaker volume when the key has been pressed, or the
ringer volume at any other time (page 33).
FUNCTION key settings: Press these keys after pressing the FUNCTION
key to scroll through the FUNCTION MODE settings.
Number keys
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.
Panel release
Press this release to open the operation panel.
STOP key
Press this key to cancel an operation before it is completed.
COPY/HELP/POLL key
Press this key to make a copy of a document (page 106). Press this key to
print out the Help List, a quick reference guide to the operation of the fax
machine. This key is also used after dialling to poll (request fax transmission
from) another machine (page 114).
START/MEMORY key
Press this key after dialling to begin fax transmission (page 86). Press this key
before dialling to send a fax through memory (page 96).
INTERCOM key
Press this key to page or locate the cordless handset.
Left and right arrow keys
Auto-dial numbers: When sending a fax or making a phone call, press these
keys to scroll through your auto-dial numbers (page 91), the “REVIEW
CALLS” list (only available if you have Caller ID; page 110), and the last
number dialled (redial; page 93).
FUNCTION key settings: Press the right arrow key after scrolling with the up
and down arrow keys to select a FUNCTION key setting.
11 11
10 10
9
8
12 12
13 13
14 14
7
all.book Page 10 Monday, September 1, 2003 3:46 PM