Connecting the power cord, Connecting the handset – Sharp UX-D50 User Manual

Page 19

Advertising
background image

Setting Up

17

1. Ins

tal

lati

on

Connecting the power cord

Plug the power cord into a 220 - 230 V, 50 Hz, earthed (2-prong) AC outlet.

Caution: The power outlet must be installed near the equipment and must be
easily accessible.

The machine does not
have a power on/off
switch, so the power is
turned on and off by
simply plugging in or
unplugging the power
cord.

Connecting the handset

Connect the handset as shown and place it on the handset rest.

The ends of the handset cord are identical, so they will go into either jack.

Make sure the handset
cord goes into the jack
marked with a handset
symbol on the side of
the machine!

Use the handset to make ordinary phone calls,
or to transmit and receive faxes manually.

all.book Page 17 Monday, September 1, 2003 3:46 PM

Advertising