Sharp UX-D50 - Manual (Page 45)

Storing and Using Auto-Dial Numbers
43
2. Cordles
s
Hands
et
Editing an auto-dial number
If you need to make changes to a previously stored auto-dial number, follow
these steps:
1
Press .
2
Press and then .
3
Press .
•
The name of one of your stored auto-dial numbers appears.
4
Press or until the name of the number that you wish to edit
appears in the display.
5
Press .
6
Edit the name.
•
Press to delete letters (hold down to delete all the letters). Press
the number keys to enter new letters (see Step 4 on page 39).
•
If you do not wish to change the name, go directly to Step 7.
7
Press .
8
Edit the number.
•
Press to delete digits (hold down to delete all digits). Press the
number keys to enter new digits.
•
If a pause is required between any of the digits to access a special service
or an outside line, hold down until “xx” appears.
Cordless handset display:
1 PHONE BK
12 EDIT
all.book Page 43 Monday, September 1, 2003 3:46 PM