Sharp UX-D50 - Manual (Page 56)

Other Features
54
3
Press once. The duration appears.
4
Press repeatedly to exit.
End call setting
When this setting is turned on, calls can be ended by simply replacing the
handset in the charger (there is no need to press ). (A call will end even
if it has been placed on hold.)
1
Press 3 times.
2
Press once.
3
Press once.
4
Press or to select ON or OFF
and then press .
5
Press repeatedly to exit.
Cordless handset display:
4 SET
41 END CALL
Turning the cordless handset power on and off
To conserve battery power, you can turn the cordless handset off. To turn off
the power, hold down until the display goes blank. To turn the power on,
hold down until the display turns on. The power also turns on
automatically when the cordless handset is placed in the charger.
DONE
all.book Page 54 Monday, September 1, 2003 3:46 PM