Sharp UX-D50 - Manual (Page 90)

Sending a Fax by Automatic Dialling
88
Sending a Fax by Automatic Dialling
You can store up to 40 fax or phone numbers in the fax machine for automatic
dialling.
♦
Auto-dial numbers are dialled by pressing until the desired number
appears in the display, and then .
Storing fax and phone numbers for automatic dialling
START/SPEICHER
1
Press once and once.
2
Press once.
3
Enter the fax or voice number by pressing the number keys. Up to 32
digits can be entered. (Note: A space cannot be entered.)
•
To clear a mistake, press .
•
If a pause is required between any of the digits to access a special service
or an outside line, press . The pause appears as a hyphen. Several
pauses can be entered in a row.
•
If you are on a Flash-type PBX and are storing a number for an outside line,
press , press to insert a pause, and then enter the fax or voice
number. (When you dial the auto-dial number, you will automatically dial out
without the need to press the key.)
•
If you are on a PBX that requires dialing a number to dial out and are
storing a number for an outside line, enter the number, press to
insert a pause, and then enter the number of the receiving machine. (When
you dial the auto-dial number, you will automatically dial out without the
need to dial the number for an outside line.)
FUNKTION
FUNKTION
R
FUNKTION
R
FUNKTION
Display:
ENTER FAX #
<NEW NUMBER>
all.book Page 88 Monday, September 1, 2003 3:46 PM