Sony TA-FA1200ES - Manual (Page 9)

9 GB
G
e
tting Star
te
d
Connecting the AC power
cord (mains lead)
Connect the supplied AC power cord (mains
lead) to the AC IN terminal on the amplifier,
then connect the AC power cord (mains lead)
to a wall outlet.
You can connect the AC power cord (mains
lead) of your component to the amplifier’s AC
OUTLET(s).
* The configuration, shape, and number of AC
outlets will vary according to the area.
** A several space is left between the plug and the
rear panel even when the power cord (mains
lead) is inserted firmly. The cord is supposed be
connected this way. This is not a malfunction.
Notes
• The AC OUTLET(s) on the rear of the amplifier is
a switched outlet, which supplies power to the
connected component only while the amplifier is
turned on.
• Make sure that the total power consumption of the
component(s) connected to the amplifier’s AC
OUTLET(s) does not exceed the wattage stated on
the rear panel. Do not connect high-wattage
electrical home appliances such as electric irons,
fans, or TVs to this outlet. This may cause a
malfunction.
Inserting batteries into
the remote
Insert two R6 (size-AA) batteries in the RM-
AAU010 remote commander.
Observe the correct polarity when installing
batteries.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
Tip
When the remote no longer operates the amplifier,
replace all the batteries with new ones.
AC OUTLET* AC IN terminal
To the wall outlet
AC power cord
(mains lead)
(supplied)
**
RM-AAU010