Siemens SIPART PS2 6DR52xx User Manual
Siemens For the car
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- SIPART PS2 Manual
- Contents
- 0 Information for the Operator
- 1 Introduction
- 2 Design and Method of Operation
- 3 Preparing for Operation
- 3.1 Instrument identification (type key)
- 3.2 Dimensional drawings
- 3.3 Assembly
- 3.3.1 Instructions for using positioners in a wet environment
- 3.3.2 Instructions for using positioners which are exposed to strong
- 3.3.3 Mounting kit “linear actuator” 6DR4004-8V and 6DR4004-8L
- 3.3.4 Assembly procedure (see figure 3-7, page 51)
- 3.3.5 Mounting kit “part-turn actuator” 6DR4004-8D
- 3.3.6 Assembly procedure (see figure 3-8 and figure 3-9)
- 3.4 Electrical Connection
- 3.5 Pneumatic Connection
- 3.6 Commissioning
- 3.6.1 Preparations for linear actuators
- 3.6.2 Automatic initialization of linear actuator
- 3.6.3 Manual initialization of linear actuator
- 3.6.4 Preparations for part-turn actuator
- 3.6.5 Automatic initialization of part-turn actuator
- 3.6.6 Manual initialization of part-turn actuators
- 3.6.7 Automatic initialization (structograms)
- 3.7 Copying initialization data (positioner exchange)
- 4 Operation
- 5 Service and Maintenance
- 6 Technical Data
- 7 Scope of Delivery
- 8 Index
- 9 Appendix