Sennheiser EM 3731 - Manual (Page 10)

8
Overview of the display
Overview of the display
Reception display
³
RF level display “RF” for antenna A
·
Diversity display (antenna A or antenna B active)
»
RF level display “RF” for antenna B
¿
Audio level display “Dev”
´
Display of the squelch threshold
For additional information see pages 9 and 10.
Status display
²
Frequency display
¶
“MHz” – appears when the frequency is displayed
º
6-step transmitter battery status display
¾
Command display (status display of the audio outputs AF and COM)
(EM 3732 Command twin receiver only)
µ
Display for the current frequency bank and channel or the name
For additional information see pages 10 and 11.
Brightness control
The display has an automatic brightness control. The brightness is dimmed
after the last key stroke. With each new button press, the display lights up
with full brightness.
300
100
30
10
10
50
100
PEAK
µV
RF % DEV
M
H
z
790.800
03.03 BANK
CH
A B
COM AF
³ » ¿ ² ¶ º
µ ´
·
¾
Triggers for dimming after Behavior of the display
No service 60 s Display is slightly dimmed
Squelch not reached 20 min Display turned off