Samsung DLP TV SP46L6HX - Manual (Page 11)

English - 11
n
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER ( ) button on the remote control to turn the
screen off.
Result: The STAND BY/TEMP indicator on the front of the
television lights.
2 To turn the screen back on, simply press the POWER ( ) button
again.
➢
You can also switch on by pressing the P / , TV or numeric
button.
☛
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the power
switch on the back of the set. It is best to unplug the set
from the mains and aerial.
Placing Your Television in Standby Mode
The mains lead is attached to the rear of your television.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2 Press the power switch on the side of the television toward “ON”
(I).
3 Press the POWER ( ) button on the remote control (or the “ ”
button on the front of the television).
Result: The programme that you were watching last is re-
selected automatically.
➢
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
15 or “Storing Channels Manually” on page 16.
4 To switch your television off, press the power switch toward “OFF”
(O).
Switching Your Television On and Off
TV
TV
BP68-00478E-00Eng_0826 8/26/05 6:04 PM Page 11