Samsung DLP TV SP46L6HX - Manual (Page 12)

English - 12
W
se
se
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Display the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the next -
stored channel.
Used to display the -
previous stored channel.
to Used to display the corresponding channels.
➢
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this will
result in a single digit channel being displayed.
-/-- Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Used to switch repeatedly between the last two channels
displayed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the numeric buttons to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the -
volume.
Used to decrease the -
volume.
Used to switch the sound off temporarily.
➢
To turn the sound back on, press this button again, or
press the
or button.
Used to display the Used to return to the previous
on-screen menu system. menu or normal viewing.
- Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
- Used to confirm your choice.
- Used to exit from the menu
system and return to normal
viewing directly.
BP68-00478E-00Eng_0826 8/26/05 6:04 PM Page 12