Samsung DLP TV SP46L6HX - Manual (Page 38)

English - 38
Y
by
w
Selecting the Sound Mode
(depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the side of the
television. If the mono sound comes out only from left
speaker, press the DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual 1/2
Regular broadcast
(Standard audio)
Bilingual or Dual I/II
Stereo
On-screen indication
Mono (Normal use)
NICAM Mono
↔ Mono
NICAM Stereo ↔ Mono
(Forced mono)
Mono
Dual I ↔ Dual II
Stereo
↔ Mono
(Forced mono)
NICAM Dual 1 →
NICAM Dual 2 →
Mono
NICAM
Stereo
A2
Stereo
BP68-00478E-00Eng_0826 8/26/05 6:08 PM Page 38