Samsung Evergreen a667 - Manual (Page 32)

27
• Send Message: allows you to create and send a new Text or
Multimedia Message.
• More:
– Calendar: Allows you to temporarily access your calendar while still
maintaining the active call.
– Memo: Allows you to access Notes.
– Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the
contacts you have selected. These DTMF tones are sent as a group.
The DTMF tones are the tones used in phones for tone dialling,
sounding when you press the number keys. This option is helpful for
entering a password or an account number when you call an automated
system, like a banking service.
• End call: Allows you to end the active call.
• Mute: Allows you to turn off your microphone.
2. If you are engaged in a call, you can place the active call
on hold by selecting the New call option and either dialing
another number or answering another incoming call. Once
the second call is activated, the following options are
available:
• Swap: Places the active call on hold and then re-activates the call on
hold.
• Join: Joins two calls (both active and on hold) into a multi-party call.
Using the Speakerphone During an Active Call
While in an active call, it is possible to enable the speakerphone
feature.
1. Dial the number and press .
2. Press to activate the speakerphone.
3. Press the Volume keys (located on the left side of your
phone) to adjust the volume.
Important!: For more information, see “Responsible Listening” on page 124.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that
the other person cannot hear you.
Example: You wish to say something to person in the room, but do not want
the person on the phone to hear you.
Note: If you are already in Video Share or you have a call on hold, you need to
select Mute/Unmute.
To switch the microphone off temporarily during a call:
1. Press Mute. The option is then replaced with Unmute.