Samsung SIR-T351 - Manual (Page 26)

CHAPTER THREE
Operation
3 3
26
Checking the Digital-Signal Reception
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital
(HDTV) channels have either perfect reception quality or you will not receive them at all.
So, unlike analog channels, you cannot fine tune a digital channel. But you can adjust
your antenna to improve the reception of available digital channels.
1 Press the MENU button on the remote control.
2 Use the Menu Up/Down
buttons to highlight the
Channel icon and
press ENTER.
Use the Menu Up/Down
buttons to highlight the
Channel Signal Strength
icon and press ENTER.
3 If the signal strength meter
indicates that the signal is
weak, physically adjust your
antenna to increase the signal
strength. Continue to adjust
the antenna until you find the
best position with the strongest signal.
4 When you have finished adjusting your antenna, press EXIT.
NOTE
“No Signal” may appear on the screen depending on the broadcast station conditions,
even if an incoming broadcast signal exists.
Memorize Channels √ √
Add / Delete Channels √ √
Check Signal Strength √ √
CHANNEL CHANNEL
Check signal strenght Check signal strenght
MD68-00XXXA(E)-CHAPTER 3 4/4/03 11:10 AM Page 26