Samsung DE7711 - Manual (Page 6)

6 M ICROWAVE OVEN INSTALLATION R EQUIREMENTS
M ICROWAVE O VEN I NSTALLATION R EQUIREMENTS
Requirements
The requirements for proper microwave oven
operation are as follows:
• Operating Voltage: 12V DC
• Breaking Voltage: Min. 11.5V, Max. 15.5V
• Battery life must be at least 90Ah at 12V
If possible, connect the oven to a separate supply
battery (a secondary battery).
Supplied Items
Microwave oven, Turntable, Terminal Post Cover
(plastic cover), Install bracket(Left/Right), 6-#5 Tap
screws and Owner’s Manual. The battery
connection power cable is not included.
Items needed for Installation
Before installing the appliance, make sure you have
the following items:
• 6-#5 Tap screws (The length of the screw is subject
to the installation requirements. Refer to page 8)
• 2 connection power cables : one red, one
black(refer to the page 10 for the length and size of
the connection cables)
• Power cable terminal, power cable binder, and
electrical tape.
Depending on the installation location, the following
tools may be required.
• Stick ruler, chalk, hammer, and gimlet.
• Drill and borer
• Ring/Fork type spanner set
• Crimp pincers, soldering iron
• Screw driver
Installation
Installation Location Tips
• Before installing the oven, be sure to comply with
the following:
The installation location for the oven should be
even, flat, and sturdy.
• Do not allow humidity or heat to affect the oven.
• Allow free space of about 50mm around the oven
for ventilation (Fig.1).
(Fig. 1)
Microwave Oven
7711-body.auto.fm Page 6 Tuesday, August 24, 2004 1:52 PM