Speco Technologies Power Over Ethernet IP-POEH101 - Manual

Power Over Ethernet
IP-POEH101
Features:
• IEEE 802.3af fully compliant
• Powered device (PD) detection and classification
• In-rush current limit
• Over-current and over-temperature protection
• Power good and fault status indication
• Auto-restart fault management
• Easy and simple installation
• Detection collision avoidance
• Surge protector for powered pair
Specifications:
• Data rate: up to 100Mbps
• Pinout: 4/5(+), 7/8(-)
• Output voltage: 48V DC
• User port power: 15.4W min. (up to 23W)
• AC input voltage: 85-264V AC
• AC Frequency: 50/60Hz
• AC to DC conversion: S.M.P.S.
• Dimensions: 4.56” L x 1.5” H x 5.51” D
IP-POECAM
Features:
• IEEE 802.3af fully compliant
Specifications:
• No. of ports:
1 input/1 data output/power output
• Data rate: up to 100Mbp
• Pinout: 4/5(+), 7/8(-) & 1/2(+), 3/6(-)
4/5(-), 7/8(+) & 1/2(-), 3/6(+) (option)
• Input voltage: -36 to -57DC
• Withstand voltage: 0 to -57DC
• Input average power: 12.95W max.
• Output max. power: 10W
• Output voltage: 12V DC
• Max output current: 0.9A @ 12V DC
• Inrush current limit: 400mA
• Output ripple & noise:
Vp-p=100mV (3.3V, 5V, @20 Mhz)
Vp-p=150mV (12V, 15V, @20 Mhz)
• Dimensions: 3” L x 3.78” H x 1.03” D
Specifications subject to change
For more information contact us at:
Speco Technologies 200 New Highway, Amityville, NY 11701 Web: www.specotech.com
Toll Free: 1-800-645-5516 In Metro NY: 631-957-8700 Fax: 631-957-9142 or 631-957-3880
• Power any Speco Technologies IP Camera from up to 330 feet away over network cabling
• Does not limit camera performance or features
• Eliminates the need for local camera power
IP-POEH101 IP-POECAM
AC INPUT
POWER CABLE OUTPUT
TO IP CAMERA
LAN CABLE INPUT
NETWORK CABLE OUTPUT
TO IP CAMERA
NETWORK CABLE OUTPUT
TO IP-POECAM
NETWORK CABLE OUTPUT
FROM IP-POEH101